An eddy current separator (ECS) is a machine that separates conductive non-ferrous metals from non-metallic materials.
A high-speed magnetic rotor generates a rapidly changing magnetic field. When conductive aluminum particles enter the field, electrical currents are induced inside them. The resulting interaction produces a force that deflects the particles.
The EDDY CURRENT SEPARATOR is a key machine in suitable aluminum recovery systems.
The separation process includes six main steps:
Mixed waste is evenly fed onto a conveyor.
The material travels toward the magnetic rotor.
A changing magnetic field induces currents in aluminum particles.
The induced currents interact with the magnetic field.
Aluminum particles follow a different trajectory from non-metallic materials.
A splitter directs the separated fractions into different collection areas.
This principle is described in a scientific review of non-ferrous metal recovery.
A suitable ECS system can help a recycling plant:
Recover aluminum from mixed waste.
Reduce metal losses in residue streams.
Automate part of the sorting process.
Improve the quality of downstream material.
Support dry material separation.
Make better use of secondary raw materials.
Actual recovery and product quality depend on the feed material and the complete process.
![]()
|
Industry |
Typical aluminum source |
Process requirement |
|---|---|---|
|
Municipal waste |
Cans and packaging |
Pre-sorting and screening |
|
Automotive recycling |
Body parts and components |
Dismantling and shredding |
|
E-waste |
Housings and components |
Liberation and size classification |
|
Construction waste |
Frames and profiles |
Removal of attached materials |
|
Scrap metal |
Mixed aluminum scrap |
Ferrous removal and further sorting |
Related solutions include the WASTE RECYCLING PRODUCTION LINE and SCRAP METAL RECYCLING PRODUCTION LINE.
|
Material |
ECS behavior |
Processing note |
|---|---|---|
|
Aluminum |
Conductive non-ferrous target |
Common recovery material |
|
Copper |
Conductive non-ferrous target |
May require further sorting |
|
Brass |
Conductive non-ferrous target |
Particle conditions matter |
|
Iron and steel |
Ferromagnetic |
Normally removed upstream |
|
Plastic |
Generally non-conductive |
Usually follows the non-metal stream |
|
Glass |
Non-conductive |
Usually follows the non-metal stream |
An ECS does not automatically separate aluminum from copper into two pure products.
A typical process may be:
Shredding: A DOUBLE SHAFT SHREDDER MACHINE may reduce bulky feedstock.
Screening: A VIBRATING SCREEN MACHINE can classify material by size.
Magnetic separation: Remove iron and steel.
ECS: Recover suitable conductive non-ferrous particles.
Further sorting: Improve the aluminum-rich fraction if required.
|
Factor |
Effect |
|---|---|
|
Particle size |
Influences trajectory and suitability |
|
Particle shape |
Flat and elongated pieces may be difficult |
|
Material liberation |
Attached materials affect separation |
|
Feed distribution |
Overlapping particles reduce clarity |
|
Feed speed |
Excessive speed may reduce performance |
|
Rotor configuration |
Influences the magnetic field |
|
Splitter position |
Determines output division |
Research into aluminum recovery from crushed e-waste identifies feed speed and particle characteristics as important factors.
|
Item |
Magnetic Separator |
Eddy Current Separator |
|---|---|---|
|
Target |
Iron and steel |
Aluminum and other conductive non-ferrous metals |
|
Principle |
Magnetic attraction |
Induced current and repulsion |
|
Process position |
Upstream |
Downstream |
|
Main role |
Ferrous removal |
Non-ferrous recovery |
Before selecting equipment, confirm:
Material composition and aluminum content.
Particle size distribution.
Particle shape and thickness.
Required throughput.
Upstream shredding and screening.
Ferrous removal arrangement.
Target output quality.
Installation space and electrical requirements.
For complex feedstocks, review the METAL RECYCLING LINE CONFIGURATION.
|
Item |
Buyer requirement |
|---|---|
|
Drawings |
Plant layout and equipment dimensions |
|
OEM references |
Existing equipment and replacement part numbers |
|
Material |
Feed composition, size, and contamination |
|
Capacity |
Required throughput |
|
MOQ |
Confirm with supplier |
|
Lead time |
Confirm production schedule |
|
Packaging |
Export packing and moisture protection |
|
Shipping |
LCL, FCL, or suitable transport |
|
Inspection |
Mechanical, electrical, and functional checks |
Ask suppliers whether they can evaluate samples, provide drawings, support OEM integration, supply spare parts, and coordinate export delivery.
|
Problem |
Possible Cause |
Recommended Solution |
|---|---|---|
|
Low aluminum recovery |
Poor liberation |
Review shredding |
|
Aluminum in residue |
Incorrect splitter setting |
Conduct controlled adjustment |
|
Non-metal in concentrate |
Excessive feed depth |
Improve distribution |
|
Uneven output |
Unstable feeding |
Control feed rate |
|
Small particles lost |
Unsuitable size range |
Review screening and ECS suitability |
|
Belt tracking issue |
Misalignment |
Inspect belt and tension |
Daily: Check belt condition, material buildup, noise, vibration, and output.
Weekly: Inspect belt tracking, splitter, guards, and accessible mechanical components.
Monthly: Inspect drive and electrical systems according to the manual.
Preventive maintenance: Record operating conditions and monitor separation results.
Spare parts: Keep recommended belts and critical components available.
Always isolate the machine before maintenance.
Customer Type: Mixed waste recycling facility
Material Type: Shredded waste containing aluminum, plastics, ferrous metals, and residues
Operating Conditions: Screening and magnetic separation before ECS
Problem: Aluminum remains mixed with non-metallic residue.
Solution: Review material liberation, screen the feed, remove ferrous metals, and test an ECS using representative samples.
Result: The intended process produces an aluminum-rich fraction and a reduced-metal residue stream. Actual recovery and purity must be confirmed by testing.
This is an illustrative process scenario, not a verified customer case.
Q1. What does an eddy current separator do in aluminum recycling?
An ECS recovers suitable conductive aluminum particles from prepared mixed waste. A changing magnetic field induces electrical currents inside the metal particles, creating a force that changes their trajectory. It is commonly used in scrap, municipal waste, automotive, and e-waste recycling. Material preparation and testing are important before selecting a machine.
Q2. Can an ECS recover aluminum from plastic waste?
Yes, provided the aluminum particles are suitably liberated and the feed is prepared. Aluminum still attached to plastic or other materials may not separate as expected. Shredding, screening, and feed presentation should be evaluated. Thin foil and very small particles can require special process consideration.
Q3. Why is magnetic separation needed before ECS?
Magnetic separation removes iron and steel before the non-ferrous recovery stage. This prepares a more suitable feed for ECS and reduces unwanted ferrous material entering downstream equipment. The appropriate magnetic separator and process position depend on the feed composition and plant layout.
Q4. Can an ECS separate aluminum and copper?
A conventional ECS primarily separates conductive non-ferrous metals from non-metallic materials. It does not automatically produce separate pure aluminum and copper products. Additional sorting may be needed to achieve individual metal grades. Buyers should define the required output quality before purchasing equipment.
Q5. What particle size is suitable for ECS?
There is no universal particle size for every machine. The suitable range depends on rotor design, particle shape, metal content, and the required separation result. A waste-treatment reference discusses conditioning certain non-ferrous waste fractions within 3–150 mm, but this should not be treated as a universal specification.
Q6. What information should buyers provide for a quotation?
Provide material photos or samples, particle size distribution, aluminum content, required throughput, upstream process, installation space, and target output quality. A plant layout and process flow diagram are also useful. These details help the supplier evaluate the equipment configuration and any additional preparation requirements.
Q7. How can ECS reduce recycling costs?
An ECS may reduce aluminum losses in residue streams and automate part of the sorting process. The economic result depends on recoverable metal content, concentrate quality, operating costs, maintenance, and the market value of recovered aluminum. Buyers should assess the complete process rather than assume a fixed recovery rate.
Q8. What maintenance does an ECS require?
Maintenance generally includes conveyor inspection, belt tracking, splitter checks, cleaning, drive-system inspection, and safety-device checks. Follow the manufacturer's manual and record changes in output quality. Sudden changes in separation results may indicate feed or equipment problems that need investigation.
Eddy current separators are important for recovering aluminum from prepared mixed waste. Effective results depend on material liberation, particle size, feed distribution, upstream magnetic separation, and correct equipment configuration.
A complete process evaluation—from pre-sorting and shredding to screening, ECS separation, and downstream handling—is the best starting point for an aluminum recovery project.
Tel/WeChat/WhatsApp: 008613383116640
WhatsApp: http://wa.me/13383116640
Pessoa de Contato: Mr. Maple
Telefone: +86 17778255675
Fax: 86--311-80690567