logo
Casa
Produtos
Sobre nós
Excursão da fábrica
Controle da qualidade
Contacte-nos
Pedir um orçamento
Notícia
TOGETHER HTL LTD
Casa Notícias

What Is the Function of a Stator in a Flotation Cell?

A TOGETHER HTL LTD é uma empresa muito boa, estou muito disposto a cooperar com você, seguro, eficiente, profissional, honesto, feliz! Obrigado por me fornecer serviço e produtos estáveis. -----EUROPAT

—— EUROPT INDUSTRIAL

Estou Chat Online Agora
empresa Notícias
What Is the Function of a Stator in a Flotation Cell?
últimas notícias da empresa sobre What Is the Function of a Stator in a Flotation Cell?

Quick Answer

A flotation cell's stator is the stationary vane ring that surrounds the rotor and performs three simultaneous functions: it converts the rotor's swirling discharge into directed vertical circulation, it forms the second shear zone that finishes air dispersion into fine bubbles, and it evens out pulp upwelling so the froth layer stays stable and scavengeable. Bubble fineness, pulp suspension, and froth stability all depend on the stator's geometry and wear state.

Every mechanical flotation machine pairs one moving part with one that never moves. The moving one gets photographed. The stationary one does the quiet conversion that turns agitation into metallurgy, and buyers who understand it negotiate better, because stator and rotor sets are consumables ordered repeatedly — and supplier quality shows up as dimensional fit, material consistency, and honest wear data.

Key Takeaways

· The stator converts swirl into vertical circulation, finishes air shearing, and stabilizes the froth.

· Clearance between rotor tips and stator vanes is the single number that governs bubble fineness.

· Wear degrades all stator functions together on one measurable curve.

· Replace rotor and stator as a matched pair at roughly 15-20% weight loss or doubled clearance.

· Rubber suits coarse rougher duty; polyurethane suits fine corrosive duty; composite suits high-velocity edges.

· Complete enquiries and documented suppliers prevent most aftermarket fitment problems.

Summary Table

Item

Description

Function

Swirl-to-circulation conversion, secondary air shear, froth stabilization, tank protection

Material

Rubber-faced steel, polyurethane, ceramic-composite or hardened vane edges

Application

Rougher, cleaner, and scavenger stators across sulphide flotation machine families

Service Life

Months per campaign, judged by weight loss and clearance growth

Benefits

Stable recovery, even froth, planned shutdowns, protected tank shell

 

Definition: What Exactly Is the Stator in a Flotation Cell?

The stator — some OEMs call it a diffuser or disperser — is the ring of stationary vanes bolted to the tank bottom around the rotor. Its vanes stand a designed few millimeters from the rotor's swept tips, submerged in abrasive slurry around the clock. Machine families shape it differently: an SF Flotation Cell carries a different vane profile from an XCF/KYF Flotation Cell, and older XJK Flotation Cell machines differ again. The principle never changes; the geometry does.

The Flotation stage sits mid-circuit — fed by grinding and classification, drained by dewatering — and stator health ripples in both directions through that neighborhood.

2.Steel stator core on a machining fixture before rubber facing 

A matched pair in a drained cell — the clearance between rotor tips and stator vanes sets bubble fineness.

Working Principle: The Three Functions of the Stator

Flow conversion. The rotor throws slurry outward as swirl, and swirl alone mixes nothing — the pulp rotates with the impeller, relative velocity collapses, and particles orbit the shaft without ever meeting fresh bubbles. The stator's vanes catch that tangential jet, break its spin, and redirect the stream upward. What leaves the rotor as a horizontal vortex enters the pulp as vertical circulation: slurry rises across the cell cross-section, sweeps the froth interface, and returns down the draft tube for another pass. That loop keeps coarse particles suspended and delivers bubbles everywhere in the pulp, not just above the shaft.

Secondary air shear. Air leaves the rotor blades as a rough, partly coalesced gas-liquid mixture. The narrow annular gap between rotor tips and stator vanes subjects that mixture to a second, more violent shear field, tearing remaining large bubbles down to design fineness. Fine bubbles carry more surface per unit of air, rise more slowly, and give particles more attachment time. The full flow-pattern physics is treated in this guide to Rotor & Stator in Mechanical Flotation Cells, and the maintenance logic in the companion piece on Rotor and Stator Wear Parts.

Froth stability and tank protection. Even upwelling across the whole cross-section gives an even froth depth and a froth that carries concentrate to the lip instead of collapsing over dead patches. The ring also stands between the rotor's high-velocity discharge and the tank shell, which is why shells last decades on cells where stators are changed on time. A further quiet benefit: swirl is wasted energy, and the stator is the component that converts motor power into useful velocity gradients instead of churning.

Benefits: What a Healthy Stator Delivers

· Recovery held at design, because bubble fineness and circulation stay where the metallurgist set them.

· An honest froth, even across the cell, that carries concentrate instead of collapsing unevenly.

· Power spent on work, because the motor's energy goes into velocity gradients rather than spin.

· Planned maintenance, because weighed stators announce their own replacement dates.

· A protected tank shell that doesn't see high-velocity slurry directly, and downstream Thickeners that never receive a sanded slug.

· Negotiating strength, since a plant with its own wear curve buys on schedule instead of in emergencies.

Applications: Where Stators Earn Their Keep

Stators work wherever mechanical flotation works: copper, lead-zinc, nickel, gold sulphide, phosphate, lithium, and industrial mineral circuits. Rougher machines give them tonnage and coarse feed. Cleaners demand bubble precision in delicate chemistry. Scavengers ask them to circulate pulp everyone else has already processed once.

The demand side keeps widening. On November 17, 2026, Koryx Copper released the pre-feasibility study for its Haib copper project in Namibia — a 48 Mtpa milling-and-flotation plant that rejects roughly a quarter of run-of-mine mass as barren coarse tailings ahead of a hybrid Jameson and tank-cell circuit, targeting about 135 ktpa of copper in concentrate over the first ten years. Hybrid flowsheets of that kind ask tank cells to run at higher loadings than the previous generation, and stator geometry carries more of that burden than any other wear part.

Material Comparison: Rubber vs Polyurethane vs Ceramic Composite

Property

Rubber-Faced Steel

Polyurethane

Ceramic Composite

Abrasion resistance

Good

Very good

Excellent at leading edges

Impact tolerance

Excellent — deflects

Moderate — may crack

Brittle under direct impact

Chemical resistance

Moderate

Very good

Very good

Profile retention

Fair

Good

Excellent

Relative cost

Lowest

Mid

Highest

Natural home

Coarse rougher feed

Cleaners, corrosive pulps

High-velocity vane edges

 

Rubber shrugs off tramp and coarse lumps but surrenders edge sharpness sooner. Polyurethane holds geometry through fine abrasion and chemistry. Composite and hardened inserts concentrate hardness where slurry velocity peaks — the leading edges and inner passages — stretching campaigns on large machines, provided tramp protection holds.

Application Comparison: Matching Duty to Material

Duty

Recommended Material

Deciding Factor

Large rougher machines

Rubber, composite edges

Impact tolerance plus tip velocity

Cleaner circuits

Polyurethane

Geometry and chemical stability

Scavenger cells

Rubber or PU per data

Measured wear rate, not tradition

Regrind-fed fine duty

PU or composite

Profile loss costs recovery most

High-tip-speed tank cells

Composite on leading edges

Tempo do bar : 2026-11-18 11:19:40 >> lista da notícia
Contacto
TOGETHER HTL LTD

Pessoa de Contato: Mr. Maple

Telefone: +86 17778255675

Fax: 86--311-80690567

Envie sua pergunta diretamente para nós (0 / 3000)